Install Player on Samsung Digital Signage

Samsung SSSP Commercial Display Support

SSSP 6.0 on Tizen 4.0 or SSSP 10 on Tizen 6.5 or higher

Check the full list of supported devices.

Check the supported features.

Install from URL

Switch from MagicInfo to URL Launcher

Tizen 4.0

Tizen 4.0 Option 1: Follow this if Samsung SSSP is already in use

Press HOME on the remote control
Go to URL Launcher Settings

Uninstall any previously installed apps
Type in the URL of the digital signage app: https://appds.io/ts
Click on Done

Digital Signage App is now installed, it will start automatically.

When the app starts, the hash code will show on the screen
Go to the management console and add your screen

Tizen 4.0 Option 2: Follow this if Samsung SSSP is brand new or after a factory reset

The brand new device will start with an initial setup, Follow the below instructions:

Choose Basic Setup in the installation type page.

Select a language.

Choose the orientation (Landscape or Portrait).

You can change the orientation remotely from the management console later on – after adding the screen

Set Auto Power off to OFF

Set your network connection (Wireless or wired)

In Play Via page, Choose play via URL Launcher
Type in the URL of the digital signage player for SSSP https://appds.io/ts

Click on Done

Choose Skip in the step of Connect to RM Server

Set the correct date and time.

Setup is complete. Digital Signage Player is ready to use.

Digital Signage App is now installed, it will start automatically

When the app starts, the hash code will show on the screen
Go to the management console and add your screen

Tizen 6.5

Tizen 6.5 Option 1: Follow this if Samsung SSSP is already in use

From the Remote Control, Press HOME
From the menu, Choose Custom App
In case there was a previous application installed, it will show near App Management

Choose it and click Uninstall
Choose Install Custom App
Type in the URL of digital signage player app, https://appds.io/ts
The App will download and start automatically
When the app starts, the hash code will show on the screen
Go to the management console and add your screen

Tizen 6.5 Option 2: Follow this if Samsung SSSP is brand new or after a factory reset

Select your Language on the welcome screen
Set your network connection (Wireless or wired)
Review and Accept the Privacy Notice
In Installation Type, Choose Basic Setup
Choose the orientation (Landscape or Portrait). You can change the orientation remotely from the management console later on – after adding the screen
Under Player Selection, Choose Custom App
Type in the URL of the digital Signage Player Application: https://appds.io/ts
Set Skip for RM Server setup
Disable Auto Power Off mode
Set the correct date and time
Choose a PIN
On the Remote Control, Press on MENU
Choose Custom App
The App will download and start automatically
Go to the management console and add your screen

Install from USB Flash Drive

Prepare the USB flash drive on a PC

Plug your USB Flash Drive to a PC
Download the following file under the USB root folder: https://appds.io/ts/SSSP.zip
Unzip the file under the root of the USB flash drive (DO NOT create a folder under the USB), if usb flash drive is F:/. the folder should look like this: F:/SSSP
It will create a folder named SSSP . Under this folder there are 2 files (DigitalSignage.wgt and sssp_config.xml), as following:

USB Setup on SSSP6 – Tizen 4.0 Display

Insert your USB flash drive into your Samsung display
On the remote control, Press the HOME button
Select URL Launcher
Select Install From USB Device.
Enter the PIN
The Digital Signage Player will start to download and install automatically
The app will launch once the download is complete
When the app starts, the hash code will show on the screen
Go to the management console and add your screen

USB Setup on SSSP10 – Tizen 6.5 Display

Insert your USB flash drive into your Samsung display
On the remote control, Press the HOME button
Select App Management
Select Install from USB Device
Enter PIN if required
The Digital Signage Player will start to download and install automatically
The app will launch once the download is complete
When the app starts, the hash code will show on the screen
Go to the management console and add your screen

How to Switch a Samsung Display from MagicInfo to URL Launcher

If you’re unable to see the URL Launcher or APP Management on your Samsung display’s Home Menu, it’s likely because the ‘Source’ setting is currently set to ‘MagicInfo’. To resolve this, you’ll need to switch it to ‘URL Launcher’.
To switch the screen to URL Launcher, follow these steps:

Press the ‘Menu’ button on the remote control to open the device menu.
Select ‘System’.

Scroll to the bottom of the menu and select the ‘Play Via’ option.
Select the ‘URL Launcher’ option. If any app is installed on your device, the option available may be a ‘Custom App’ instead of ‘URL Launcher’.

Press the ‘Home’ button and select ‘URL Launcher’ from the home menu.

Tizen 7

Make sure your screen is setup to play via Custom App. Press Menu > System > Play Via > Custom App

Install the DS application by going to Features > AppManagement. If you see this feature is not available, switch your screen to HDMI and then try again.

Click on “Install Custom App” and enter this url https://appds.io/ts7 then click Go

The application should get downloaded, installed and start automatically.

List of Supported SSSP Models

SSSP10 Tizen 2022 and newer

QMC series
QBB series (basic) QBB: QB43B, QB50B, QB55B, QB65B, QB75B.
QMB series (mid-range) QMB: QM43B, QM50B, QM55B, QM65B, QM75B.
QHB series (high-end) QHB: QH43B, QH50B, QH55B, QH65B, QH75B.

SSSP6 Tizen 2018 and older

QMR-AN QM32R-AN
QB (Basic) QBR: QB13R, QB24R, QB43R, QB49R, QB50R, QB55R, QB65R, QB75R, QB85R, QB98R. QBR-B: QB24R-B, QB85R-B. QBN: QB49N, QB55N, QB65N, QB75N, QE82N. QBT: QB98T-B.
QM (Mid-Range) QMR: QM32R, QM43R, QM49R, QM50R, QM55R, QM65R, QM75R, QM85R. QMR-A: QM32R-A, QM43R-A, QM49R-A, QM50R-A, QM55R-A, QM65R-A, QM75R-A. QMR-B: QM32R-B, QM85R-B. QMN: QM43N, QM49N, QM55N, QM65N, QM75N, QM85N, QM98N. QMT: QM98T. QMT-B: QM98T-B.
QH (High-end) QHR: QH43R, QH50R, QH55R, QH65R, QH75R. Window Display (OM): OMN: OM46N, OM55N. OMN-D: OM46N-D, OM55N-D.
OH (Outdoor Signage): OHF: OH55F. OHN: OH85N, OH85N-SK, OH85N-DK, OH85N-S.