Install Player on Samsung Digital Signage

 

Samsung SSSP Commercial Display Support

  • SSSP 6.0 on Tizen 4.0 or SSSP 10 on Tizen 6.5 or higher

Check the full list of supported devices.

 

Check the supported features.

 

Install from URL

Tizen 4.0

Tizen 6.5

 

Tizen 7

   

Install from USB Flash Drive

Switch from MagicInfo to URL Launcher

 


Tizen 4.0

Tizen 4.0 Option 1: Follow this if Samsung SSSP is already in use

  • Press HOME on the remote control
  • Go to URL Launcher Settings

URL Launcher Settings

  • Uninstall any previously installed apps
  • Type in the URL of the digital signage app: https://appds.io/ts
  • Click on Done

URL Launcher Settings Type

  • Digital Signage App is now installed, it will start automatically.

 URL Launcher

  • When the app starts, the hash code will show on the screen
  • Go to the management console and add your screen

Hash Code

 

Tizen 4.0 Option 2: Follow this if Samsung SSSP is brand new or after a factory reset

The brand new device will start with an initial setup, Follow the below instructions:

  • Choose Basic Setup in the installation type page.

Basic Setup

  • Select a language.

Language

  • Choose the orientation (Landscape or Portrait).

You can change the orientation remotely from the management console later on – after adding the screen

Orientation

  • Set Auto Power off to OFF

Auto Power Off

  • Set your network connection (Wireless or wired)

Network

  • In Play Via page, Choose play via URL Launcher
  • Type in the URL of the digital signage player for SSSP https://appds.io/ts

Play Via

  • Click on Done

URL Launcher

  • Choose Skip in the step of Connect to RM Server

Skip RM Server

  • Set the correct date and time.

Date and time

  • Setup is complete. Digital Signage Player is ready to use.

Setup Done

  • Digital Signage App is now installed, it will start automatically

URL Launcher

  • When the app starts, the hash code will show on the screen

  • Go to the management console and add your screen

Hash Code

 


Tizen 6.5

Tizen 6.5 Option 1: Follow this if Samsung SSSP is already in use

  • From the Remote Control, Press HOME

  • From the menu, Choose Custom App

  • In case there was a previous application installed, it will show near App Management

previous app

  • Choose it and click Uninstall

    Uninstall

  • Choose Install Custom App

  • Type in the URL of digital signage player app, https://appds.io/ts

    Custom App

  • The App will download and start automatically

    Installing

  • When the app starts, the hash code will show on the screen

  • Go to the management console and add your screen

Hash Code

 

Tizen 6.5 Option 2: Follow this if Samsung SSSP is brand new or after a factory reset

  • Select your Language on the welcome screen

    Welcome

  • Set your network connection (Wireless or wired)

    Network

  • Review and Accept the Privacy Notice

    Privacy Notice

  • In Installation Type, Choose Basic Setup

    Basic Setup

  • Choose the orientation (Landscape or Portrait). You can change the orientation remotely from the management console later on – after adding the screen

    Orientation

  • Under Player Selection, Choose Custom App

    Custom App

  • Type in the URL of the digital Signage Player Application: https://appds.io/ts

    URL

  • Set Skip for RM Server setup

    Skip RM Server

  • Disable Auto Power Off mode

    Auto Power off

  • Set the correct date and time

    Date time

  • Choose a PIN

    Pin

  • On the Remote Control, Press on MENU

  • Choose Custom App

    Custom App

  • The App will download and start automatically

    Installing

  • Go to the management console and add your screen

Hash Code

 


Install from USB Flash Drive

Prepare the USB flash drive on a PC

  • Plug your USB Flash Drive to a PC

  • Download the following file under the USB root folderhttps://appds.io/ts/SSSP.zip

  • Unzip the file under the root of the USB flash drive (DO NOT create a folder under the USB), if usb flash drive is F:/. the folder should look like this: F:/SSSP

  • It will create a folder named SSSP . Under this folder there are 2 files (DigitalSignage.wgt and sssp_config.xml), as following:

    files

USB Setup on SSSP6 – Tizen 4.0 Display

  • Insert your USB flash drive into your Samsung display

  • On the remote control, Press the HOME button

  • Select URL Launcher

  • Select Install From USB Device.

    Install from USB

  • Enter the PIN

    PIN

  • The Digital Signage Player will start to download and install automatically

  • The app will launch once the download is complete

    DONE

  • When the app starts, the hash code will show on the screen

  • Go to the management console and add your screen

Hash Code

USB Setup on SSSP10 – Tizen 6.5 Display

  • Insert your USB flash drive into your Samsung display

  • On the remote control, Press the HOME button

  • Select App Management

    App Management

  • Select Install from USB Device

    App Management

  • Enter PIN if required

  • The Digital Signage Player will start to download and install automatically

  • The app will launch once the download is complete

  • When the app starts, the hash code will show on the screen

  • Go to the management console and add your screen

Hash Code

 

How to Switch a Samsung Display from MagicInfo to URL Launcher

If you’re unable to see the URL Launcher or APP Management on your Samsung display’s Home Menu, it’s likely because the ‘Source’ setting is currently set to ‘MagicInfo’. To resolve this, you’ll need to switch it to ‘URL Launcher’.
To switch the screen to URL Launcher, follow these steps:

  1. Press the ‘Menu’ button on the remote control to open the device menu.
  2. Select ‘System’.

SSSP System Menu

  1. Scroll to the bottom of the menu and select the ‘Play Via’ option.
  2. Select the ‘URL Launcher’ option. If any app is installed on your device, the option available may be a ‘Custom App’ instead of ‘URL Launcher’.

SSSP Play Via Menu

  1. Press the ‘Home’ button and select ‘URL Launcher’ from the home menu.

 

Tizen 7

 

  1. Make sure your screen is setup to play via Custom App. Press Menu > System > Play Via > Custom App

 

SSSP Play Via Menu

 

  1. Install the DS application by going to Features > AppManagement. If you see this feature is not available, switch your screen to HDMI and then try again.

 

SSSP App Management

 

  1. Click on “Install Custom App” and enter this url https://appds.io/ts7 then click Go

 

SSSP Install App

 

The application should get downloaded, installed and start automatically.

 


 

 

List of Supported SSSP Models

 

SSSP10 Tizen 2022 and newer
  • QMC series
  • QBB series (basic) QBB: QB43B, QB50B, QB55B, QB65B, QB75B.
  • QMB series (mid-range) QMB: QM43B, QM50B, QM55B, QM65B, QM75B.
  • QHB series (high-end) QHB: QH43B, QH50B, QH55B, QH65B, QH75B.
SSSP6 Tizen 2018 and older
  • QMR-AN QM32R-AN
  • QB (Basic) QBR: QB13R, QB24R, QB43R, QB49R, QB50R, QB55R, QB65R, QB75R, QB85R, QB98R. QBR-B: QB24R-B, QB85R-B. QBN: QB49N, QB55N, QB65N, QB75N, QE82N. QBT: QB98T-B.
  • QM (Mid-Range) QMR: QM32R, QM43R, QM49R, QM50R, QM55R, QM65R, QM75R, QM85R. QMR-A: QM32R-A, QM43R-A, QM49R-A, QM50R-A, QM55R-A, QM65R-A, QM75R-A. QMR-B: QM32R-B, QM85R-B. QMN: QM43N, QM49N, QM55N, QM65N, QM75N, QM85N, QM98N. QMT: QM98T. QMT-B: QM98T-B.
  • QH (High-end) QHR: QH43R, QH50R, QH55R, QH65R, QH75R. Window Display (OM): OMN: OM46N, OM55N. OMN-D: OM46N-D, OM55N-D.
  • OH (Outdoor Signage): OHF: OH55F. OHN: OH85N, OH85N-SK, OH85N-DK, OH85N-S.